Create your own magical, glitter-filled snow globe tumbler

Let’s be honest sometimes your everyday water bottle is just...meh. But what if your tumbler could swirl, shimmer, and sparkle every time you take a sip? Enter: the DIY Snow Globe Tumbler. It’s a fun, simple project that transforms an ordinary cup into something joyful and eye-catching.

What makes this version even easier? You can skip the drilling! There are tons of double-walled tumblers with pre-drilled holes available online (Amazon, Etsy, and craft supply sites are great places to look). These ready-to-fill cups make the entire process a breeze, even if you’re a first-time crafter.

 

What You’ll Need

Here’s your glittery ingredient list:

  • double-walled tumbler with a pre-drilled hole (search for "snow globe tumbler with hole" online)

  • Clear glue or vegetable glycerin (helps glitter float and swirl slowly)

  • Distilled water

  • Glitter (fine, chunky, holographic, mix and match your fave styles!)

  • Mini floating charms (optional, but super cute)

  • funnel or squeeze bottle

  • silicone plug (usually comes with the tumbler)

  • UV resin or waterproof glue for sealing

  • Paper towels for cleanup

  • Optional: gloves and a towel to protect your workspace

 

Let’s Make It

Follow these simple steps to bring your custom tumbler to life:

1. Start with a Clean Tumbler

Make sure your tumbler is clean and completely dry. Since it already has a pre-drilled hole, you are all set to go.

2. Create Your Liquid Mix

In a small bowl or measuring cup, mix distilled water with clear glue or glycerin. I personally like glycerin but you can use either. A good ratio is about 70% water to 30% glue. This gives the glitter that dreamy slow-drift effect you want.

3. Add Glitter & Charms

Using a funnel, add your favorite glitter mix into the tumbler through the pre-drilled hole. Be sure to not over do it with the glitter. Start off little by little and plug the bottom with the stopper to see how you like the movement and adjust. If you’re using mini charms or confetti, add those too. This is where you get to be playful and customize the vibe. Try pastel mermaid, disco sparkle, or spooky Halloween for a fun theme ideas.

4. Fill with Your Glitter Liquid

Carefully pour the liquid mix into the tumbler through the same hole. Leave a small air pocket at the top so the glitter has room to float and move. Make sure you do not overfill your tumbler as you will have a difficult time sealing your cup.

5. Seal the Hole

Plug the hole with the silicone stopper provided with your tumbler. For extra protection, seal around the plug with UV resin or strong waterproof glue. I personally like the Uv route but either will work. Let it fully cure according to the product instructions.

6. Shake & Admire

Once the seal is completely dry, give it a shake and watch the magic happen. You just made your very own snow globe tumbler go you! Make sure to only hand wash your tumbler and never place in dishwasher.

Back to blog
star